APC Smart-UPS On-Line 20kVA/20kW Rack/Tower Network Card SRTG20KXLI apc SRTG20KXLI

APC Smart-UPS On-Line, 20kVA/20kW, Rack/Tower, 230V/380V...415V, Hard wire 5-wire(3P+N+E)+3-wire(1P+N+E), Network Card, W/O rail kit SRTG20KXLI

Specifications:

Main

• Main Input Voltage: 230 V AC 1 phase, 400 V AC 3 phases

• Product or component type: Uninterruptible power supply (UPS)

• Other Input Voltage: 380...415 V, 220...240 V

• Main Output Voltage: 230 V AC 1 phase, 400 V AC 3 phases

• Other Output Voltage: 230 V

• Rated power in W: 20000 W

• Rated power in VA: 20000 VA

• output connection type: 1 IEC 60320 C19

• Output connector type: Hard wire 5 wire (3P + N + E) 1, Hard wire 3-wire (1P + N + E) 1

• Number of rack unit: 7U

• Provided equipment: 1 x USB cable, 1 x RJ45 cable, 2 x rack mounting brackets, 2 x stabilization/wall mounting feet, 2 x installation manual, 1 x C13-C14 power cord, 1 x external battery pack, 1 x battery cable

• Range of product: Smart-UPS On-Line

Complementary

• Battery type: Lead-acid external included

• UPS connectivity: Serial port, USB port, Pre-installed network management card 3

• Mounting mode: Rack-mounted with kit sold separately

Batteries & Runtime

• Battery type: Lead-acid battery

• Battery voltage: +/- 192 V

• Extended runtime: 1

• Number of battery filled slots: 0

• Number of battery free slots: 0

• Battery recharge time: 4 h

• Number of battery replacement quantity: 2

• Battery life: 3…5 year(s)

• Battery charger power: 2160 W rated

General

• Number of power module filled slots: 0

• Number of power module free slots: 0

• Redundant: No

• UPS type: Double conversion online

Physical

• Colour: Black (RAL 9005)

• Height: 306 mm

• Width: 440 mm

• Depth: 835 mm

• Net weight: 142.5 kg

• Mounting location: Front

• Mounting preference: Lower

• Mounting mode: Rack-mounted

• Two post mountable: 0

• USB compatible: Yes

• Mounting position: Horizontal
  
  

Input

• Maximum input current: 87 A

• Input harmonic distortion: Less than 5 % for full load

• Load power factor: From 0.9 leading to 1 lagging

• Switching current capacity: 125 A

• Input voltage limits: 160...285 V full load, 100...285 V half load

• Number of input connectors: 1 hard wire 5 wire (3P + N + E), 1 hard wire 3-wire (1P + N + E)

• Network frequency: 40...70 Hz auto-sensing

Output

• Bypass type: Internal bypass (automatic and manual)

• Crest factor: 3 : 1

• Harmonic distortion: Less than 2 %

• Maximum configurable power in VA: 20000 VA

• Maximum configurable power in W: 20000 W

• Output overload operation: 60 seconds at 125% and 30 seconds at 150%

• Wave type: Sine wave

• Efficiency: 94.5 %

• Output frequency: 50/60 Hz +/- 4 Hz sync to mains

• Additional information: Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage, Configurable for 220 : 230 or 240 nominal output voltage

Conformance

• Product certifications: CE, UKCA

• TISI

• Standards: EN/IEC 62040-1:2019/A11:2021, EN/IEC 62040-2:2006/AC:2006, EN/IEC 62040-2:2018

Communications & Management

• Emergency power off: Yes

• Free slots: 0

• Preinstalled device: Network management card 3 with environmental monitoring

• Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
  
  

Surge Protection and Filtering

• Surge energy rate: 600 J

• Noise suppression: Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

Packing Units

• Unit Type of Package 1: PCE

• Number of Units in Package 1: 1

• Package 1 Height: 53.5 cm

• Package 1 Width: 79.0 cm

• Package 1 Length: 59.0 cm

• Package 1 Weight: 157.2 kg