APC Smart-UPS On-Line 10kVA/10kW Rack/Tower 230V SRTG10KXLI apc SRTG10KXLI

APC Smart-UPS On-Line, 10kVA/10kW, Rack/Tower, 230V, 2x IEC C13+1x IEC C19+Hard wire 3-wire (H+N+E) outlets, Network Card, W/O rail kit SRTG10KXLI

Specifications:

Main

• Main Input Voltage: 230 V AC 1 phase

• Product or component type: Uninterruptible power supply (UPS)

• Other Input Voltage: 220 V, 240 V

• Main Output Voltage: 230 V AC 1 phase

• Other Output Voltage: 220 V, 240 V

• Rated power in W: 10000 W

• Rated power in VA: 10000 VA

• output connection type: 2 IEC 60320 C13, 1 IEC 60320 C19

• Output connector type: Hard wire 3-wire (H N + E) for 1 zone(s)

• Number of rack unit: 5U

• Provided equipment: 1 x USB cable, 1 x RJ45 cable, 2 x rack mounting brackets, 2 x stabilization/wall mounting feet, 2 x installation manual, 1 x C13-C14 power cord, 1 x external battery pack, 1 x battery cable

• Range of product: Smart-UPS On-Line

Complementary

• Battery type: Lead-acid external included

• UPS connectivity: Serial port, USB port, Pre-installed network management card 3

• Mounting mode: Rack-mounted with included kit

Batteries & Runtime

• Battery type: Lead-acid battery

• Battery voltage: +/- 96 V

• Extended runtime: 1

• Number of battery filled slots: 0

• Number of battery free slots: 0

• Battery recharge time: 4 h

• Number of battery replacement quantity: 2

• Battery life: 3…5 year(s)

• Replacement battery: APCRBC174

• Battery charger power: 431 W rated

General

• Number of power module filled slots: 0

• Number of power module free slots: 0

• Redundant: No

• UPS type: Double conversion online

Physical

• Colour: Black (RAL 9005)

• Height: 217 mm

• Width: 440 mm

• Depth: 680 mm

• Net weight: 101.5 kg

• Mounting preference: No preference

• Mounting mode: Rack-mounted with kit

• Two post mountable: 0

• USB compatible: Yes

• Mounting position: Horizontal

Input

• Maximum input current: 30 A

• Max short time withstand current: 40 kA

• Input voltage limits: 160...285 V full load, 100...285 V half load

• Number of input connectors: 1 hard wire 3-wire (1P + N + E)

• Network frequency: 40...70 Hz auto-sensing

Output

• Bypass type: Internal bypass (automatic and manual)

• Crest factor: 3 : 1

• Harmonic distortion: Less than 2 %

• Maximum configurable power in VA: 10000 VA

• Maximum configurable power in W: 10000 W

• Wave type: Sine wave

• Efficiency: 93.5 %

• Output frequency: 50/60 Hz +/- 4 Hz sync to mains

• Additional information: Configurable for 220 : 230 or 240 nominal output voltage

Conformance

• Product certifications: CE, UKCA, TISI

• Standards: EN/IEC 62040-1:2019/A11:2021, EN/IEC 62040-2:2006/AC:2006, EN/IEC 62040-2:2018
  
  

Communications & Management

• Emergency power off: Yes

• Preinstalled device: Network management card 3 with environmental monitoring

• Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

• Surge Protection and Filtering

• Surge energy rate: 600 J

Packing Units

• Unit Type of Package 1: PCE

• Number of Units in Package 1: 1

• Package 1 Height: 68.5 cm

• Package 1 Width: 59.4 cm

• Package 1 Length: 79.4 cm

• Package 1 Weight: 124.5 kg